Tektronix 3732

The ultra-high density 3732 matrix card is comprised of four banks, each with 4 rows by 28 columns of reed relays. This provides 448 single-pole crosspoints for maximum connection versatility in high channel count applications. For even greater flexibility, bank configuration relays are mounted on the card. They offer an automated method of connecting banks to enable two additional matrix configurations: single 4×112 and dual 4×56. This feature allows the matrix size to be easily adapted to existing or future applications. For differential (2-wire) measurements, a two-pole mode can be selected that enables automatic pairing of crosspoints to create a dual 4×28 or single 4×56 configuration. For larger matrix sizes, analog backplane relays are provided that enable rows to connect to the Series 3700A mainframe backplane. This allows, for example, a matrix of up to 4 rows by 672 columns within a single 3706A mainframe using six 3732 cards.

Key Features
• Four independent banks of 4×28 single-pole matrices
• 200 V, 1.2 A carry or 0.75 A switched signal capacity; 15 W, 15 VA
• Bank configuration relays enable alternative matrix sizes, including:
– Dual 4×56 (1 wire)
– Single 4×112 (1 wire)
– Single 4×56 (2 wire)
• Optional accessory, 3732-ST-R, enables screw terminal access and additional matrix sizes including:
– Dual 8×28 (1 wire)
– Single 16×28 (1 wire)
– Single 8×28 (2 wire)
• Analog backplane connection relays provide easy card-to-card column expansion
• Long life dry reed relays (>10 9 operations)
• Ideal for high channel count I-V testing with Series 2600B Systems

The card uses optimized reed relays that offer both low contact potential and low current offset to minimize the switching errors that often accompany this relay technology. Additionally, these relays provide greater signal voltage (200 V) and current (1.2 A carry) dynamic range while supporting the long life and fast actuation times necessary in many automated test applications.

The 3732 uses two 78-pin male D-sub connectors for signal and configuration connections. For screw terminal connections, two accessories are offered. Use the 3732- ST-R for the 16×28 or dual 8×28 matrix configurations. Use the 3732-ST-C for the 4×112, dual 4×56, or base quad 4×28 matrix configurations.